CR Collapsible Power Reel

Click on image above for a larger view of the CR Collapsible Power Reel

The CR Collapsible Power Reel is used for rapidly stringing or taking up wire or small diameter cable. Ideal for placing or removing aerial cable, taking down wire, or pulling winch line into conduits.

• Can be used for pulling in poly rope or tape, where the reel will only be used as a pulling capstan and not as a storage device

Maximum of 3 wraps
Excessive wraps of poly rope or tape will cause the reel to fail, voiding the warranty.

• The reel mounts on the end of any 2 7/16 in. (62 mm) winch drum extension shaft, bayonet or pin type mount unit

• Has a capacity of 1,600 ft. of 1/4 in. (490 m of 6 mm) wire rope with a maximum allowable pull of 3500 lbs. Bare Drum (1600 kgs) Can also store a 200 pound coil of wire.

• A half turn of the locking member collapses all six movable segments, allowing you to quickly mount or remove coils

• Consists of a spindle with a fixed spider and sliding spider to which are attached six rim segments. Is made of heat treated aluminum, with a durable yellow finish.

• Reel O.D.: 28 in. (expanded), 18 3/4 in. (collapsed). ID: 20 in.

Contact GMP for information on repairs and refurbishment.

CR Collapsible Power Reel
P/N 08136 Weight: 70 lbs.

Replacement Parts Click on number for photo
Qty	Item No.	Description	PDF Version
1	15478	Spindle assembly (with spring)
1	02253	Spring
1	05602	Fixed spider
1	28339	Pin
6	05603	Rim-segment
12	05607	Pin
6	05609	Link
1	05601	Sliding spider
1	05604	Pin
1	05610	Plug
1	05612	Spring
1	05611	Spacer Sleeve
1	05608	Handle
6	05606	Pin
AR	05615	Shim
1	03614	Bolt
1	27932	Nut Locking
20	17854	Cotter pin 1/8 X 1.00L.G.

100

General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053-4996 USA LOGO