• Provides a maximum open working position of 73 in. (185 cm) and a minimum closed working position of 35-1/8 in. (902 mm)

• Each Manhole Platform Support provides a maximum working load limit of 400 lbs.

• Each unit features three telescoping pipe lengths, connected to two hangers that fit on the cable racks at opposite sides of the manhole

• The middle pipe section has a friction ring latch that locks onto the outside of the inner pipe to keep the pipes from accidentally extending during handling

• The hangers pivot so that you can use the supports even if the racks aren't directly across from each other

• There is a spring latch on each end for locking the support in place when in use

• Two wire stops extending through the pipes prevent over-extension of the telescoping sections

• Each is supplied with a thin film of oil on the exposed surfaces to minimize rusting and to reduce friction between the telescoping surfaces

Model D Manhole Platform Support
P/N 08633 Weight: 15 lbs. (6 kgs)