Inner Duct Cutter

Make precise cuts around innerduct diameters up to
3-3/8 in. (88mm)

• Used primarily for allowing access to fiber already placed inside of inner duct when it needs to be repaired, or broken out, the tubing cutters provide a lean cut every time.

• The special wheel allows it to cut a wide variety of plastic pipe and tubing.

• Open the cutter with a push of a button.

• Line up the cutter wheel with your cut-off mark. Push in on the knob to bring the wheel up against duct then turn the knob to penetrate.

• Uses a ball detent pin for quick wheel changes

Inner Duct Cutter for 3/8'' - 3 1/2''
P/N 10912 Weight: 2 lbs. 11 oz. (1.2 kg)

Replacement Wheel
P/N 10911 Weight: 1 oz. (28 g)

Micro Duct Cutter

Will cleanly cut micro duct up to 3/4 in. (19mm)

• A hardened steel blade is mounted to a sturdy plastic spring-action frame.

• Just align your duct with the blade and the "V" anvil and squeeze.

• Blade is easly replaced by removing two screws.

Micro Duct Cutter for up to 3/4'' (19mm)
P/N 89565 Weight: 3 oz. (85 g)

Replacement blade
P/N 89566 Weight: 1 oz. (28 g)

111