Innerduct Pulling Eyes

These rugged chrome-plated steel pulling eyes allow innerduct placement to become a faster, safer operation.

• Easy insertion by rotating the pulling eye into the innerduct allows the threads to make the connection

• A convenient hole in the threaded end of the pulling eye body is used to tie off the innerduct pulling line or tape keeping it from being lost during the pulling operation

• Our Swiveling Innerduct Pulling Eyes eliminate the need to use a separate swivel between the winch line and innerduct

• The hex portion of the Swiveling Innerduct Pulling Eye allows use of a wrench to make the final turns when inserting into innerduct

Innerduct Pulling Eyes

P/N	Nominal Duct Dia.	Innerduct Inside Dia. Range

60510	1 in. & 1-1/8 in.	1.00 - 1.18 in. (25.4 - 30.0 mm)
60512	1-1/4 in. & 1-3/8 in.	1.25 - 1.43 in. (31.8 - 36.3 mm)
60515	1-1/2 in.	1.50 - 1.68 in. (38.1 - 42.7 mm
60520	2 in.	2.00 - 2.18 in. (50.8 - 55.4 mm)

P/N	Max Pulling Eye Dia.	Overall Length

60510	1.50 in.	5-1/8 in. (130.2 mm)
60512	1.75 in.	5-1/8 in. (130.2 mm)
60515	2.00 in.	5-3/4 in. (146.1 mm)
60520	2.50 in.	5-3/4 in. (146.1 mm)

Innerduct Pulling Eyes With Swivels

P/N	Nominal Duct Dia.	Innerduct Inside Dia. Range

61510	1 in. & 1-1/8 in. (25.4 & 28.6 mm)	1.00 - 1.18 in. (25.4 - 30.0 mm)
61512	1-1/4 in. & 1-3/8 in. (31.8 & 34.9 mm)	1.25 - 1.43 in. (31.8 - 36.3 mm)
61515	1-1/2 in. (38.1 mm)	1.50 - 1.68 in. (38.1 - 42.7 mm
61520	2 in. (50.8 mm)	2.00 - 2.18 in. (50.8 - 55.4 mm)

P/N	Max Pulling Eye Dia.	Overall Length

61510	1.50 in. (38.1 mm)	5-9/16 in. (141.3 mm)
61512	1.75 in. (44.5 mm)	5-19/32 in. (142.1 mm)
61515	2.00 in. (50.8 mm)	6-9/32 in. (159.5 mm)
61520	2.50 in. (63.5 mm)	6-13/32 in. (162.1 mm)

Click on image above for a larger view of the Innerduct Pulling Eyes

Innerduct Pulling Eyes With Swivels

General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053 USA LOGO