let you make clean cable holes for placing flanges in 1 in. (25.4 mm)
dia. or larger paper or pulp insulated lead or plastic sheath cable. |
• Available with either a .221 inch (5.6 mm) dia. or .480 inch (12.2 mm) dia. shank
• The double-ended hollow bit is secure to the shank of the knurled, aluminum-alloy handle with a steel nut
To bore a hole, just twist the drill into the cable until the drill turns freely; you can then remove the slug with the spring loaded ejection-pin built into the handle
Pneumatic Cable Drill
A valve on the drill's side lets you directly connect a pressure chuck, so you can quickly create a valve connection to a lead sleeve or cable sheath without losing gas or waiting for pressure to equalize between exiting valves.
The reversible, double-ended hollow steel bit is mounted at one end of the polished shank. A special gland on the shank side of the handle and a valve stem in the handle itself provide exceptional sealing.
A spring-loaded ejection pin in the stem provides an easy way to remove leftover slugs.
C Cable Drill
|Click on image above for a larger view of the Cable Drills|
General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053 USA
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2011 General Machine Products Co., Inc