Ball Bearing Swivels Title
 
HOME
dot
about us
dot
products
dot
tutorials
dot
where to buy
dot
news at GMP
dot
contact us
topbar2
 
Ball Bearing  

These tough swivels are designed to handle higher thrust loads for extra cable safety and faster straight pulls.

• Precision-machined body is made of high quality stainless steel with higher working load ratings than comparably sized swivels available on the market

• These heavy-duty swivels are built with a thrust bearing for tensile load and a radial bearing for bending load

• Working Load Limit for under ground applications is based on a horizonal pull of 3:1 while aerial applications have a WLL of 5:1


Note: These swivels are not designed for Directional Drilling applications. They are designed for pulling cable or rope.

Do not allow these swivels to be pulled around a bullwheel or capstan. Damage to the swivel and/or wheel may occur.


Ordering Information
P/N
Working Load Limit Under Ground
Working Load Limit Aerial
Eye Width

70136
2,250 lbs.
(10.0 kN)

1350 lbs.
(6.0 kN)

3/8 in.
(9.5 mm)
70137
5,000 lbs.
(22.2 kN)
3000 lbs.
(13.3 kN)
17/32 in
(13.5 mm)
70138
7,000 lbs.
(31.1 kN)
4200 lbs.
(18.7 kN)
9/16 in.
(14.3 mm)
70139
10,000 lbs.
(44.5 kN)
6000 lbs.
(26.7 kN)
11/16 in.
(17.5 mm)
70140
25,000 lbs.
(111.2 kN)
15000 lbs.
(66.7 kN)
1-1/32 in.
(26 mm)


Ordering Information
P/N
Dia.
Length
Pin (P/N)
Weight

70136
7/8 in.
(22 mm)
3-3/8 in.
(86 mm)
Slot (28039)

.45 lbs (.20 kg)

70137
1-1/4 in.
(31.8 mm)
4-5/32 in.
(105.6 mm)
Slot (28048)
.95 lbs (.43 kg)
70138
1-3/8 in.
(34.9 mm)
4-19/32 in.
(116.7 mm)
Hex (28058)
1.35 lbs (.61 kg)
70139
1-5/8 in.
(41.3 mm)
5-7/16 in.
(138.1 mm)
Hex (28067)
2.2 lbs (1.00 kg)
70140
2-1/2 in.
(63.5 mm)
9-5/8 in.
(244.5 mm)
Hex (28908)
7.6 lbs (3.45 kg)
Click on image above for a larger view of the Ball Bearing Swivels
Buy Online at Craftworktools.com
76
 
bottom bar
dot dot dot dot dot dot
General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053 USALOGO
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2011 General Machine Products Co., Inc