 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
)
This
convenient product will allow multiple pulls at one time by attaching
2 to 4
cables or ducts to the Puller.
• The slings
are manufactured from aircraft quality wire rope.
• The various “legs” are staggered in length so the individual connections are not interfering with each other. The lead coupler can be easily dismantled to change out a leg or to add another leg.
• Each leg is marked with load capacity and they are pull tested to 3 times that rating. The safety factor of 3:1 is based on equal pull on all cables, (horizontal pull only).
• Other sling configurations are available upon request.
Cable Pulling HarnessesP/N |
Number of Legs |
Maximum Harness Width |
Safe Working Load (3:1) |
Wire Rope Diameter |
Leg Lengths
|
| 70298 | 3 |
2-1/4 in. (57 mm) |
2000 lbs. (9 kN) |
1/8 in. (3 mm) |
7", 10", 15" |
| 70299 | 3 |
3-1/8 in. (79 mm) |
5800 lbs. (26 kN) |
1/4 in. (6 mm) |
10", 18", 26" |
| 70300 | 3 |
3-1/2 in. (89 mm) |
8400 lbs. (37 kN) |
3/8 in. (10 mm) |
16", 25", 36" |
| 70312 | 4 |
2-1/4 in. (57 mm) |
2000 lbs. (9 kN) |
1/8 in. (3 mm) |
7", 10", 15" ,19" |
| 70313 | 4 |
3-1/8 in. (79 mm) |
5800 lbs. (26 kN) |
1/4 in. (6 mm) |
10", 18", 26",35" |
| 70314 | 4 |
3-1/2 in. (89 mm) |
2000 lbs. (9 kN) |
3/8 in. (10 mm |
16", 25", 36",48" |
Click on image above for a larger view of the Cable Pulling Harnesses
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2011 General Machine Products Co., Inc
