Cable Feeding Sheaves

Click on image above for a larger view of the Cable Feeding Sheaves

Cable Feeding Sheaves slide into the end of conduit in a manhole wall, allowing the cable being fed into the conduit to roll smoothly over the sheave from all angles

The frame is made from steel for durability while the sheave is made from aluminum alloy or Nylatron^® with self-lubricating bearings.

The sheaves have a split tube for easy removal after cable is installed

Aluminum alloy roller Cable Feeding Sheaves

P/N	Description	Weight

70564	for 3" duct Schedule 40	17 lbs. (7.71 kgs)
70565	for 4" duct Schedule 40	23 lbs. (10.43 kgs)
70566	for 4" duct Schedule 80	23 lbs. (10.43 kgs)
70567	for 5" duct Schedule 40	27 lbs. (12.25 kgs)

Nylatron^® Roller Cable Feeding Sheaves

P/N	Description	Weight

70581	for 3" duct Schedule 40	11.4 lbs. (5.16 kgs)
70582	for 4" duct Schedule 40	17.4 lbs. (7.89 kgs)
70583	for 4" duct Schedule 80	17.4 lbs. (7.89 kgs)
70584	for 5" duct Schedule 40	20 lbs. (9.09 kgs)
70585	for 6" duct Schedule 40	38.9 lbs. (17.6 kgs)
70586	for 6" duct Schedule 80	40.4 lbs. (18.3 kgs)

Cable can be fed from any angle

General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053 USA LOGO