 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
Flexible Pulling Grips
Pulling Grips, sometimes referred to as pulling socks or stockings, are indispensable in many different cable pulling applications. Manufactured from high-tensile, galvanized steel wire that is evenly hand woven in a single, double or triple wire weave according to pulling tension requirements. We reverse weave our grips which create a loop at the end of the grip instead of being crimped or soldered together. The wire is then joined under the crimped head. This creates a higher quality product that outlasts the competition.
 |
All our pulling grips are reverse weaved to create a loop at the end instead of being crimped or soldered. This ensures reliability and durability. |
Grips are slipped over the outside sheath of a cable - when pulling tension is applied, the grip contracts applying its gripping force to the outside of
the cable.
| Single Weave-Single Flexible Eye | |||
 |
|||
| P/N | Diameter Range | Min. Breaking Strength | Grip Length |
| 70660 | 0.24 to 0.51in. (6 to 13 mm) |
1984 lbs. (900 kg) |
11.81 in. (300 mm) |
| 70661 | 0.47 to 0.75 in. (12 to 19 mm) |
3505 lbs. (1590 kg) |
21.65 in. (550 mm) |
| 70662 | 0.75 to 0.98 in. (19 to 25 mm) |
4674 lbs. (2120 kg) |
23.62 in. (600 mm) |
| 70663 | 0.98 to 1.5 in. (25 to 38 mm) |
5644 lbs. (2560 kg) |
27.56 in. |
| Double Weave-Single Flexible Eye | |||
 |
|||
| P/N | Diameter Range | Min. Breaking Strength | Grip Length |
| 70670 | 0.39 to 0.79 in. (10 to 20 mm) |
4101 lbs. (1860 kg) |
23.62 in. (600 mm) |
| 70671 | 0.79 to 1.18 in. (20 to 30 mm) |
4974 lbs. (2256 kg) |
23.62 in. (600 mm) |
| 70672 | 1.18 to 1.57 in. (30 to 40 mm) |
8148 lbs. (3696 kg) |
23.62 in. (600 mm) |
| 70673 | 1.57 to 1.97 in. (40 to 50 mm) |
12103 lbs. (5490 kg) |
23.62 in. (600 mm) |
| 70674 | 1.97 to 2.56 in. (50 to 65 mm) |
12103 lbs. (5490 kg) |
23.62 in. (600 mm) |
| 70675 | 2.56 to 3.15 in. (65 to 80 mm) |
16138 lbs. (7320 kg) |
23.62 in. (600 mm) |
| 70676 | 3.15 to 3.74 in. (80 to 95 mm) |
16138 lbs. |
23.62 in. (600 mm) |
| 70677 | 3.74 to 4.33 in. (95 to 110 mm) |
23398 lbs. (10613 kg) |
35.43 in. (900 mm) |
| Triple Weave-Single Flexible Eye with
Shoulders (The shoulders add durability to the pulling eye, increasing its life when pulled through abrasive environments) |
|||
 |
|||
| P/N | Diameter Range | Min. Breaking Strength | Grip Length |
| 70680 | 0.24 to 0.51 in. (6 to 13 mm) |
4960 lbs. (2250 kg) |
25.59 in. (650 mm) |
| 70681 | 0.47 to 0.75 in. (12 to 19 mm) |
7452 lbs. (3380 kg) |
32.48 in. (825 mm) |
| 70682 | 0.75 to 0.98 in. (19 to 25 mm) |
12214 lbs. (5540 kg) |
40.35 in. (1025mm) |
| 70683 | 0.98 to 1.26 in. (25 to 32 mm) |
21054 lbs. (9550 kg) |
51.18 in. (1300 mm) |
| 70684 | 1.26 to 1.50 in. (32 to 38 mm) |
25256 lbs. (11456 kg) |
55.12 in. (1400 mm) |
| Double Weave-Double Flexible Eye Lace Up Grip Ideal for pulling light to medium loads; the grip is fitted to the cable being pulled by stitching it together, like a football. Mainly used where a ‘typical’ cable grip can’t be fitted over a connector at the end of a cable. Comes complete with lace up material. |
|||
 |
|||
| P/N | Diameter Range | Min. Breaking Strength | Grip Length |
| 70664 | 0.47 to 0.75 (12 to 19 mm) |
2250 lbs. (1020 kg) |
27 in. (685 mm) |
| Lacing instructions | |||
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2011 General Machine Products Co., Inc
