Pulling Frames are used as a guide for the pulling line and cable when placing and removing cable in manholes that are not equipped with pulling irons.

• The 12 ft. 6 in. (3.8 m) frame is designed for use in manholes up to 11 ft. 6 in. (3.5 m) deep, while the 15 ft. (4.57 m) frame can be used in
deeper manholes

• Each frame consists of two 6 in. (152 mm), high structural aluminum channels bolted back to back

• Sheave pin holes are provided on 6 in. (152 mm)
centers, so that individual sheaves can be easily loaded or removed

• Two 1-5/16 in. (33 mm) dia. sheave pins come with each frame The C Pulling Frame is used to support Cable Sheaves or the B Quadrant Block in manhole pulling operations.

Select a GMP Cable Sheave or Quadrant Block which
best fits your pulling needs and choose the appropriate Pulling Frame from the tables below.