Cable Sheaves
 
HOME
dot
about us
dot
products
dot
tutorials
dot
where to buy
dot
news at GMP
dot
contact us
topbar2
 

Cable Sheaves

Click on image above for a larger view of the Cable Sheaves

66

  Cable Sheaves are used in placing and removing underground cables.

• Constructed from high strength aluminum alloy, and have self lubricating bushings for long, maintenance free lives

• All holes sizes are 1-3/8 in. (35 mm) dia. for 1-5/16 in. (33 mm) pin

• These units are available in 11 in. (280 mm), 20 in. (510 mm) and 26-1/2 in. (675 mm) dia., and may be purchased for maximum 3 in. (76 mm), 4 in. (102 mm), or 5Cable Sheaves in. (127 mm) cables

These units are normally used in conjunction with either the GMP Pulling Frames or Cable Sheave Shackles. A GMP Sheave Pin is also used to retain the sheave to either unit. (included with the frames or shackles).

Ordering Information:

P/N A B C Weight

71723 3 in.
(8 cm)
11 in.
(28 cm)
8-1/2 in.
(22 cm)
15 lbs.
(7 kgs)
71726 4 in.
(10 cm)
11 in.
(28 cm)
7-7/8 in.
(20 cm)
20 lbs.
(9 kgs)
71729 5 in.
(13 cm)
11 in.
(28 cm)
6-7/8 in.
(17 cm)
25 lbs.
(11 kgs)
71722 3 in.
(8 cm)
20 in.
(51 cm)
17-1/2 in.
(44 cm)
32 lbs.
(15 kgs)
71725 4 in.
(10 cm)
20 in.
(51 cm)
16 in.
(41 cm)
36 lbs.
(16 kgs)
71728 5 in.
(13 cm)
20 in.
(51 cm)
16-1/2 in.
(42 cm)
40 lbs.
(18 kgs)
71721 3 in.
(8 cm)
26-1/2 in.
(67 cm)
24 in.
(61 cm)
38 lbs.
(17 kgs)
71724 4 in.
(10 cm)
26-1/2 in.
(67 cm)
22-1/2 in.
(57 cm)
44 lbs.
(19 kgs)
71727 5 in.
(13 cm)
26-1/2 in.
(67 cm)
23 in.
(58 cm)
56 lbs.
(25 kgs)

sheave and sheave shackle
Pulling arrangement using cable sheave and cable sheave shackle
sheave and pulling frame
View of manhole showing pulling frame and cable sheave arrangement
Cable Sheaves Drawing
 
bottom bar
dot dot dot dot dot dot
General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053 USALOGO
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2003-2004 General Machine Products Co., Inc