Install these straps and prevent aerial cable from dancing in the wind; possibly causing cable damage

• These are used to connect two parallel suspension strands that span opposite sides of the utility pole

• Installation is simple and straight forward. From your starting pole, place a single B Strand Tie Strap 1/3 of the way along the span. Where severe wind conditions are a problem, place a second B Strand Tie Strap about 3/4 of the way across the span.

• Each 3/16 in thick X 1 5/16 in strap is made from round edge steel, hot dipped with a galvanized finish to resist corrosion.

• Three lengths of strap are available to match the mid span sag on your line. Our short version is 14 in. (356 mm) long and both ends are straight. The other two lengths, 20 in. (508 mm) and 26 in. (660 mm), have a straight end and the other end is bent into a 45° angle.