Cable Racking Jack

A useful tool to temporarily support cables in manhole vaults while splicing ends.

• These dependable jacks have a curved shoe that fits against the cable, a screw and nut for extending or retracting the shoe and a tubular base

• Available in two shoe diameters; 2-7/8 in. (73 mm) and 4 in. (101 mm)

• Two 15 in. (381 mm) extension sections (included) attach to the 25 in. (635 mm) main section and screw, allowing you to lengthen the jack

• All components have a baked black finish for increased corrosion protection

• Additional/replacement extension sections can be ordered separately

• Each section has a case hardened steel point for securing against the vault surface

To use, just select the shoe size that corresponds to your cable diameter, fit the shoe on the cable, secure the jack against a vault surface and rotate the nut on the threads. This moves the shoe and positions the cable into the desired location.

Cable Racking Jack Ordering Information

P/N	Description	Weight

72860	2-3/4 in. Cable Racking Jack	11 lbs. (5 kgs)
72861	4 in. Cable Racking Jack	11 lbs. (5 kgs)
03504	Extension Sections	1 lb 13 oz. (.8 kg)

Click on image above for a larger view of the Cable Racking Jack

General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053 USA LOGO