Helps control gas pressure when using pneumatic tools like a cutter or presser.

• Regulator has two gauges that can handle pressures from 0-180 psi, with maximum flow of 1500 cu. ft./hr ( 42.5 cu m/hr.)

• It's a single stage commercial regulator specially modified to include a high pressure gauge and fitting for connection to a standard 224 or 24 cu. ft. nitrogen cylinder

• The regulator has a single reducing valve and safety valve, controlled by an adjusting screw and two gauges

• The high pressure gauge monitors pressure in the cylinder, while the low pressure gauge is for the regulator outlet

P/N 75530		P/N 75531		Optional Female/Male Adaptor P/N 70119