Designed to move gas from a pressure testing regulator to an inlet valve

140

• Has a maximum working pressure of 200 lbs. psi with a minimum bursting strength of 800 lbs. psi.

• The "B" pressure hose is equipped at one end with a spring guard coupling for connection to a standard nitrogen regulator, and the other end is equipped with a spring guard coupling and a snap on air chuck for connection to a pressure testing valve

• The "C" pressure hose is equipped on one end with a brass screw on connector instead of a snap on air chuck for threaded connection to a pressure testing valve. The other end is equipped with a spring guard coupling for connection to standard pressure testing regulator.

• GMP stocks a wide variety of lengths of which the more common are : 8 ft., 30 ft., 35 ft. and 40 ft.

Type B				Type C
P/N	Length	Type		P/N	Length	Type
76760	6 ft. (1.8 M)	B		76770	8 ft. (2.4 M)	C
76761	8 ft. (2.4 M)	B		76771	25 ft. (7.5 M)	C
76762	10 ft. (3 M)	B		76772	30 ft. (9.1 M)	C
76763	15 ft. (4.5M)	B		76773	35 ft. (10.7 M)	C
76764	20 ft. (6 M)	B		76774	40 ft. (12.2 M)	C
76765	25 ft. (7.5 M)	B
76766	30 ft. (9.1 M)	B
76767	35 ft. (10.7 M)	B
76768	40 ft. (12.2 M)	B
76769	50 ft. (15.1 M)	B