Terminal Wire Reel

Perfect for paying out or re-reeling coils of jumper wire, distributing frame wire or our Modular Cordage - any small coil with a 6-1/2 in. (165 mm) nominal i.d.

• Consists of two reel flanges mounted to a supporting arm and handle all cast from heat-treated aluminum alloy that is attached to a laminated oak base

• The outer flange is readily removable by backing off a large wing nut. This also allows for the flange position to compensate for varying width coils from 3-3/8 in. to 4-7/8. (86-124 mm)

• Three flat springs on the reel hub grip the coil inside diameter which should measure 6-1/2 in. nominal x 14 in. maximum outside diameter (165 x 355 mm)

• Available in two brake configurations to prevent excessive wire over-run

• The back of the support arm has tapped holes for bolt-on mounting to a vehicle or c.o. frame member

•Overall dimensions: 21 in. high x 16 in. wide x 9 in. deep (533 x 406 x 229 mm)

The L1 style P/N 80470 has an adjustable drag brake that applies a fixed amount of friction on the flange. To compensate for wear the resistance applied is adjustable using a 7/16 in. socket and a flat blade screwdriver.

The L2 style P/N 80471 is equipped instead with an automatic disc brake that allows the reel to rotate freely when it senses tension as the wire is pulled off the reel and is automatically applied to stop reel rotation when the wire is relaxed. This brake assembly is also available as a retro-fit kit (L101 P/N/ 80472) to convert L1 reels into L2 style.

Terminal Wire Reel Ordering Information

P/N	Description	Weight

80470	Terminal Wire Reel L1	18 lbs. (8.16 kgs)
80471	Terminal Reel L2 w/Brake	19 lbs. (8.62 kgs)
80472	L101 Disc Brake Retro-fit Kit contains all components needed to substitute the L101 disc brake assembly in place of the drag brake including instructions	1 lb. (.45 kg)
05431	Disc Brake Shoe
25792	Drag Brake Repair Kit Consists of replacement brake shoe and spare hardware used in assembly	.5 lb. (.23 kg)

Click on image above for a larger view of the Terminal Wire Reel

103

L2 style/L101 Disc Brake Retro-fit Kit

General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053 USA LOGO