Included with pusher is a gasoline hydraulic power pack.

Metaflux Chain Cling Spray-
This is the only chain lubricant that we recommend for lubricating the drive chain in the Powered duct rod pusher.
P/N 89153

Designed to work with GMPS 1/2" Continuous Duct Rodders.

Operations and Maintenance Manual

Power Pack Manual

• Hydraulically powers GMP 1/2” Duct Rodders in to and out of conduits.
• Pushes and pulls with forces up to 300 lbs.
• Rod speeds up to 130’/min (40 meters/min)
• Accurately measures footage and speed with an electronic monitoring system that works in either direction. The readout can be scaled to feet or meters.
• When pulling back, the fiberglass rod is placed directly back onto the cassette.
• Features rod access areas for wiping the rod clean during the pull back operation.  Also comes with a package of rod wiper pads (GMP #32290)
• Duct Clamp on the machine, and the specially designed Duct Mounting
  Clamp Assembly (GMP #32221) provided on the rodder cassette, help stabilize both pieces of equipment during use.
• Comes with a gasoline driven power pack and hoses.
• Pusher is mounted on a lightweight, brightly painted, tubular-steel frame that can be tilted at a 30-degree angle to the manhole to reduce initial bending of the fiberglass rod.
• Must order 1/2” Duct Rodder Separately. Also, user must provide length of 1-1/4” innerduct between Rod Pusher and Rodder Cassette, and another length of 1-1/4” innerduct between the pusher and the duct to be rodded.

Powered Duct Rod Pusher
P/N 89004 (calibration in feet)
P/N 89005 (calibration in meters)
Weight: Duct Rod Pusher 210 lbs. (95 kgs.)
            Power Pack 154 lbs. (70 kgs.)