Roller Type Aerial Cable Guide

The Roller Type Aerial Cable Guide is used to guide and straighten cables as they are pulled into a lashing position from a stationary or moving cable reel.

• With its three sheaves to guide cable with minimum friction, this is the best tool you can use when handling especially heavy cable, or when using an aerial basket for "drive-off" lashing.

• The guide rides along the strand on a roller bearing for smooth movement

• A built in grip prevents back rolling during span transfers

• Also included with the guide is a safety chain to prevent the guide from coming off the strand

You can connect our Three Roller Cable Guide to the front of a J2 Lasher* equipped with a Hitch Weldment, or to a F, J, or J2 Lasher with a Hitch Field Kit. Guide attaches to front of J2 Lasher gear housing via an optional hitch weldment affixed to the lasher.

Ordering Information:

P/N	Description	Weight

91603	Discontinued Four Roller Overhead Cable Guide for 2-3/4 in. Cable or bundles to 2-3/4 in.	30 lbs. (14 kgs)
91605	Three Roller Overhead Cable Guide for 4 in. Cable or bundles to 4 in.	30 lbs. (14 kgs)
91606	Three Roller Overhead Cable Guide for 2-3/4 in. Cable or bundles to 2-3/4 in.	30 lbs. (14 kgs)

The above cable guides have 2 rollers instead of the rubber grip and they do not require the use of the hitch weldment or hitch field kit:

P/N	Description	Weight

91604	Three Roller Overhead Cable Guide for 2-3/4 in. Cable	30 lbs. (14 kgs)
30140	Hitch Weldment for J2 Lashers	1 lb. (.45 kgs)
70125	Hitch Field Kit for F, J & J2 Lashers Guide for 2-3/4 in. Cable	2 lbs. (.90 kg)*

*Only J2 Lashers with Serial #91-0001 or higher are factory ready equipped with a Hitch Weldment. All other J2 Lashers should be retro-fitted with a Hitch Field Kit.

Click on image above for a larger view of the Roller Type Aerial Cable Guide

General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053-4996 USA LOGO