Speciality Hand Tools by GMP

Lashing Wire Grip
P/N 08605
Used to temporarily fasten lashing wire under tension before placing a permanent clamp like our D or E Lashing Wire Clamps.
more info

Figure 8 Jacket Slitter
P/N 82720
The smooth, plane-like shaving action of this simple tool lets you quickly remove the polyethylene covering from the jacketed messenger on figure-8 cable without hitting the strand or damaging the cable
more info

Web Slitter .250 in. Strand
P/N 82730
Use this plier-type tool to slit the web between the strand and cable core on figure 8 cable.
more info

C Cable Sheath Slitter
P/N 07575
Used for making longitudinal slits in poly sheathed cable, this simple tool is composed of a hook-shaped steel blade that's riveted to a nickel plated steel handle.
more info

Longitudinal Duct Slitter
P/N 10900
A mechanically-assisted, hand-operated tool designed to make longitudinal slits in long lengths of innerduct.
more info

Cable Sheath Slitter
P/N 10923
An ingenious tool with a ratcheting design that longitudinally slits the outer sheath of telecom cables
more info

Inner Duct Cutter for 3/8'' - 3 1/2''
P/N 10912
Best tracking, and easiest cutters available.
more info

Round Cable Slitters
P/N 01820
Allows you to safely slit, split and remove insulation up to 3/16 in. (4.8 mm) from many kinds of single or multiple conductor cable up to 1 3/8".
more info

Splicer's Knife & Scissors Kit
P/N 15471
This kit joins our Splicer's Scissors and Skinning Knife in a single sturdy, belting-quality leather pouch you can take anywhere.
more info

Knife & Scissors Sharpener
P/N 15475
Sharp cutlery is both easier and safer to use, and you can keep your cutlery at its keenest with this easy-to-use sharpener.
more info

D Connector Presser
P/N 85330
You'll get perfect, solder-quality B Wire Connector joints every time with this heavy duty hand presser.
more info

D Insertion Cutting Tool
P/N 08764
This hand tool is an essential component to the 710 Modular Splicing System.
more info

216 C Tool
P/N 15439
Our commercial equivalent of the time-honored Bell standard has a fluted thermoplastic handle that's sized just right to fit easily in most any tool pouch.
more info

Paystation Wrench
P/N 19192
Our version of the industry-standard tool used by telephone industry service personnel to secure paystation and network interface hardware.
more info

B Ratchet Wrench
P/N 07511
Offered in two different sizes, these handy box-style wrenches are the tools to have when assembling or mounting splice and terminal cases, lashing wire and ground clamps.
more info

Terminal Socket Wrench
P/N 17073
This dual purpose "can wrench" gives you a larger (one inch dia.) thermoplastic handle than the Bell standard version, with a 3/8 in. socket for use on live binding posts and a 7/16 in. socket for opening cabinets and terminal locks.
more info

Alligator Wrench
P/N 70451
This versitile tool has the ability to accomodate metric and SAE sizes in hex and square nuts with an automatic ratchet like action
more info

C Regulator Wrench
P/N 07516
This three-slot wrench makes tightening nuts on almost any cylinder, hose or gas manifold connection a breeze.
more info

Numbering and Lettering Dies
P/N 66881
Each of these tough dies is constructed from hardened tool steel and produces clear, highly legible 3/16 in. (4.8 mm) figures for identification that's practically indelible on tools, lead cable tags or stubs.
more info

Cable Drills
P/N 67970
Lets you make clean cable holes for placing flanges in 1 in. (25.4 mm) dia. or larger paper or pulp insulated lead or plastic sheath cable.
more info

Shave Hook
P/N 07151
Used for cleaning and preparing lead cable sheath and sleeves for soldering and wiping joints.
more info

Wire Wrapping and Unwrapping Tool
P/N 20827
All three tools are designed to give you high-quality construction and fatigue-free use on all common wire wrapping and unwrapping operations.
more info

Spudger
P/N 01102
The probe of choice for separating electrical contacts or use as a wiring aid.
more info

Pry Bar
P/N 07668
Used to pry open mechanical splice cases from around cable, this 12 in. (30.5 cm) bar comes with its own fulcrum block, which attaches to a splice case bolt for added leverage.
more info

Anchor Extractor
P/N 06796
Is the tool you need to remove almost any size anchor.
more info

Digging Bars
P/N 26301-26304
The GMP Digging Bars are available in two styles: San Angelo (SA) and Bell System.
more info

3 Pound Linesman Driving Hammer
P/N 70088
Perfect for installing pole steps, drive hooks and drive screws, this hammer's forged steel head has a 7/8 in. hole for straightening spike head pole steps too.
more info

2 Pound Cross Peen Linesman Driving Hammer
P/N 70377
Rugged and well-balanced with the weight to drive lag bolts, this hammer is designed for pole-line work.
more info

GMP reserves the right, without notice, to make changes in equipment design or components as progress in engineering or manufacturing methods may warrant. See our Limited Warranty for more information.

General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053-4996 USA LOGO