Traveling Ground Kit
P/N 71637
Provides a means of maintaining a continuous ground connection to moving conductors such as strand, open wire, or pull line being placed from a stationary reel.
more info

B Temporary Bond
P/N 07781
A handy connection for temporarily grounding any conductive object in your work area which could become energized if a fault developed
more info

B & D Cable Bonds
When splicing cable, a temporary bond must be placed across the splice to provide an uninterrupted path for sheath currents at all times. These temporary bonds allow you to achieve proper continuity until a permanent bond is established
more info

B Cable Transfer Clips
P/N 68690
For making contacts with insulated conductors in cable splicing and testing operations.
more info

Needle Point Test Pick
P/N 64910
Used for identifying wires in making test splices.
more info

B & C Transfer Cords
P/N 08329
Used for maintaining continuity when slack is cut in or out of cable pairs or when cable pairs are transferred.
more info

#6 Ground Vise Connector
P/N 77966
This connector will ground any #14 to #6 conductor to cable shield at terminals or closures using Bonding Ribbon (P/N 68681) or Braid.
more info

G Bonding Vise Connector
P/N 17061
This one-piece side-loading connector will make solderless connections of Bonding Ribbon (P/N 68681) to Bonding Ribbon, braid, #6 ground wire or messenger bus.
more info

Bonding Ribbon Clamp
P/N 06568
Lets you quickly attach Bonding Ribbon to the manhole wall or roof.
more info