 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
 |
Overlashing |  |
New Construction |
D Cable Block & Lifter
P/N 72680
This block is used for
supporting a single cable up to 2-3/4 in. (70 mm) in diameter on 1/4
- 3/8 in. (6-10
mm) bare strand prior to the lashing process.
more info
F Cable Block & Lifter
P/N 08093
This block is perfect for temporarily supporting any cable up to 2-3/4 in. (70mm) diameter on 1/4 - 3/8 in. (6-10 mm) dia. suspension strand during new construction or while overlashing to existing lashed cable.
more info
VATS Block and Guide System
The VATS Block and Guide System was designed to support placement of the
Multi-Port Terminal Fiber on 1/4 - 3/8 in. (6-10 mm) dia. suspension strand
during new construction or while overlashing to existing lashed cable.
Wide 4-1/2" rollers on both block and guide,
allow for the pass thru of the largest terminal to date.
more info
G Cable Block
P/N 01051
This block is functionally similar to our D Cable Block. This larger tool can be used with the G Cable Lasher to handle cable up to 5 in. (127 mm) dia. and features strand hooks to accommodate 3/8 - 3/4 in. (10-19 mm) diameter strand.
more info
Multi Sheave Cable Block
P/N 10553
These are used to simultaneously support two, three, or four cables prior to lashing to a supporting suspension strand.
more info
H Cable Block
P/N 08608
This block is used to pull cable toward or away from corner poles and any other location where a single block is required.
more info
Mini Cable Block
P/N 01315
This versatile, economical block supports any cable up to 1-1/4 in. (32 mm) in diameter including coaxial, up so you can use it in CATV cabling.
more info
Pole Mount Block
P/N 70335
This 2-3/4 in. (70 mm) single roller block is designed to support fiber optic, self-support or small copper cables at poles.
more info
B Overlash Cable Block
P/N 70336
This block lets you overlash to cable bundles up to 2 in. (50 mm) across... and its affordability lets you use more blocks for smoother, neater lashing on new or rebuild construction.
more info
Fiber Optic Strand Lock Cable Block
P/N 70022
This heavy duty fiber block is used for supporting a single
fiber optic cable up to one inch dia. onto a maximum strand size of 3/8
in. (25 mm) prior to lashing.
more info
E Cable Block with Halo
P/N 74055
This Block is normally used for pulling in self support or pre-lashed cable and is mounted with either a B, C, D, E, or F Cable Block Frame at a pole.
more info
Self Supporting Cable Block
P/N 70200
This versatile block serves as a direct replacement for a conventional E Cable Block when pulling in prelashed or self supporting fiber optic cable. Mounts to a pole with our B, C, E or F Cable Block frames.
more info
Clip-On Cable Block
P/N 87265
This tempered spring steel block is used to support cable up to one inch during cable pull-out.
more info
75000 Cable Block
P/N 75000
A block used on 1/4 in. new strand when lashing cable up to 2-3/4 in. more info
73305 Cable Block
P/N 73305
This block is used to support one cable up to one inch on new 1/4 in. strand.
more info
4 Roller Cable Block
P/N 38100
This block can support multiple cables during new strand construction.
more info
Cable Block w/Rubber Roller 10701
P/N 10701
This economical block has a rubber roller & is used for new strand & overlash work.
more info
Cable Block w/Aluminum Roller 10700
P/N 10700
This economical block has an aluminum roller & is used for new strand & overlash work.
more info
Overlash Roller 4 in.
P/N 87210
Simple & effective, this block handles cable or bundles up to 4 in.
more info
Fixed Hinge Cable Block
P/N 70430
Used as a stationary block during the pulling in of heavy duty cable up to 6
in. in diameter.
more info
Three Roller Starter Guide Block
P/N 75268
Used as a starter block during the pulling in of heavy duty cable up to 6 in. (152 mm) diameter as it is pulled from a stationary or moving cable reel.
more info
Multi-Angle Cable Block
P/N 71543
Is used in stringing applications that call for placing lashed or single mode cables.
more info
B-F Frame Cable Blocks
P/N 74060
Are used to support either the E Cable Block (P/N 74050) or Self Support Cable Block (P/N 70200) when pulling in prelashed or self support aerial cable.
more info
|
|
|
|
|
|
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2003-2004 General Machine Products Co., Inc
