 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
P/N Various
Polywater® reduces frictional drag during the blowing of outside plant cable into duct.
more info
Metaflux Chain Lubricant
P/N 89153
A fully synthetic, special chain grease for use in lubrication of the Tornado's
drive chain.
more info
Rubber Splice Bandage
P/N 06843
This versatile pure
vulcanized gum rubber wrap is all you'll need for most cable splicing
operations.
more info
C Cement 4 oz. 12 Cans/pkg
P/N 71670
An excellent, quick-drying
rubber based adhesive for bonding rubber and sealing tapes and other
plastic materials to polyethylene cable sheath.
more info
Plastic Duct Seal Compound
P/N 24008
Non-toxic, non-shrinking
and permanently pliable compound is ideal for building watertight, dust
proof seals around wire, cable or conduit entrances in closures or ducts.
more
info
B Sealing Cord
P/N 76001
This pliable black butyl rubber material
is ideal for building up seal collars and filling cavities in splice
cases, or sealing bond clamps, ground conductors and the hardware used
in cable splicing.
more info
P/N 72030
This is a 6-mil (.15 mm) black plastic, single-ply sheeting designed for temporarily covering cable openings during splicing.
more info
P/N 07008
This safe, easy-to-use drying agent helps get rid of excess moisture in splices, cable ends and splicing materials. Our B Desiccant is a moisture-absorbing material which resembles sand in consistency.
more info
P/N 68681
Used to permanently bond the sleeves or sheath of cables in manholes.
more info
Bonding Ribbon
Clamp
P/N 06568
Lets you quickly attach Bonding Ribbon to the manhole wall or roof.
more info
#6 Ground Vise Connector
P/N 77966
This connector will ground any #14 to #6 conductor to cable shield at terminals or closures using Bonding Ribbon (P/N 68681) or Braid.
more info
G Bonding Vise Connector
P/N 17061
This one-piece side-loading connector will make solderless connections of Bonding Ribbon (P/N 68681) to Bonding Ribbon, braid, #6 ground wire or messenger bus.
more info
Soap
Solution 4 qt/pk
P/N 65010
Comes in both regular and winter formulas to help
find leaks quickly in both polyethylene and lead sheath cables, air
pipes and fittings.
more
info
P/N 82870
Available in either ready-to-use solution or concentrate, this versatile fluid can positively identify leaks in not only lead and polyethylene cable sheath, but air pipe, sleeves, splice cases and fittings.
more info
Warning Tags "GROUND" 200/pk
P/N 01068
These light-weight, durable plastic tags are an excellent weatherproof
method of marking ground connections.
more
info
P/N 76011
This pliable black butyl rubber material is ideal for building up seal collars and filling cavities in splice cases, or sealing bond clamps, ground conductors and the hardware used in cable splicing.
more info
P/N 68632
This self-vulcanizing, high-voltage rubber tape is specially designed for wet-weather splicing.
more info
P/N 71440
Two-ply blanket tape makes a perfect temporary covering and moisture seal while you're splicing, repairing or jointing insulated cable, or working on temporary gas-filled splices.
more info
P/N 72090
This 8-mil (.20 mm) thick tape is perfect when you need a finishing wrap with a high dielectric value. Not only does it provide excellent conductor insulation protection, but an extra layer of insulation as well.
more info
P/N 66841
Our cotton tape protects the insulation on cable conductors from the cut edge of a lead sheath cable.
more info
P/N 67272
This first quality, plain-woven fabric is used for initial wrapping of cable splices. It is made from unbleached cotton sheeting with a high 52 x 32 thread count.
more info
|
|
|
|
|
|
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2011 General Machine Products Co., Inc
