 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
Ball Bearing
Swivels
P/N 70136
These tough swivels are designed
to handle higher thrust loads for extra cable safety and faster straight
pulls.
more info
Innerduct Pulling
Eyes
P/N 60510
These rugged chrome-plated steel pulling eyes allow
innerduct placement to become a faster, safer operation.
more info
P/N 71130 to 71132
These Stainless Steel connectors maximize usefulness by catering to the same rope capacity and using different ends to attach to the most popular swivel sizes. We also carry a universal rope to rope connector.
more info
P/N Various
Pulling Grips are indispensable in many different cable pulling applications. Manufactured from high-tensile, galvanized steel wire that is evenly woven in a single, double or triple wire weave according to pulling tension requirements
more info
P/N 70298
This convenient product will allow multiple pulls at one time by attaching 2 or 3 cables or ducts to the Puller.
more info
B Connecting Links
P/N 80770
These time-tested,
split "sister hooks" or "figure-8" links let you join two pulling lines
together.
more
info
Lashing Wire
Shears
P/N 70355
Light weight, excellent tool for cutting through
multiple strands of lashing wire during delashing procedure.
more
info
P/N 07271
The funnel-shaped well in this aluminum can makes it easy to apply our Soap Solution while keeping your working area clean.
more info
P/N 70115
Easily punches through all types of paper, film and cable
sheaths.
more info
P/N 26301-26304
The GMP Digging Bars are available in two styles: San Angelo (SA) and Bell System.
more info
P/N 07262
These cards are available in two models and used for cleaning files and preparing cable for soldering or bonding.
more info
Splicer's Mirror
P/N 74230
This brass-framed 3 in. x 3 in. heavy plate
glass mirror lets you see the back side of the connection so you
can easily make thorough checks on cable splices or wiped joints.
more
info
B Temporary
Bond
P/N 07781
A handy connection for temporarily grounding any
conductive object in your work area which could become energized if a fault
developed
more
info
B & D Cable
Bonds
When splicing cable, a temporary bond must be placed across the splice
to provide an uninterrupted path for sheath currents at all times. These
temporary bonds allow you to achieve proper continuity until a permanent
bond is established
more
info
B & C Transfer
Cords
P/N 08329
Used for maintaining continuity when slack is cut in or out of cable pairs
or when cable pairs are transferred.
more
info
#6 Ground Vise
Connector
P/N 77966
This connector will ground any #14 to #6 conductor to cable shield at terminals
or closures using Bonding Ribbon (P/N 68681) or Braid.
more
info
G Bonding
Vise Connector
P/N 17061
This one-piece side-loading connector will
make solderless connections of Bonding Ribbon (P/N 68681) to Bonding
Ribbon, braid, #6 ground wire or messenger bus.
more info
B
Water Tool Brush
P/N 07260
Used to wash and clean terminal base plates
and hand tools with solvent, this versatile tool's 1 in. (25.4
mm) dia. cluster of 2-1/2 in. (63.5 mm) long nylon bristles won't
rot, mildew or stain.
more
info
Splicer's
Seat
P/N 07186
This solidly constructed wooden box is used
as a combination seat and tool box that you can rotate to get any
one of three different seat heights: 12 in., 15 in. or 18 in. (31
cm, 38 cm, or 46 cm).
more
info
P/N 87164
The most popular measuring wheel in use by engineers and craft personnel.
more info
P/N 87187
Hi-impact, blaze orange ABS case contains durable 1/2 in. (13 mm) x 100 ft. (30 m) fiberglass tape encapsulated in flexible plastic.
more info
P/N 70100
Similar to the " gas wrenches" of years ago, many lineman have told us that this versatile Crescent® Lineman's Adjustable Wrench is a real handy tool to have in their tool bag.
more info
|
|
|
|
|
|
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2003-2004 General Machine Products Co., Inc
