 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
P/N 01368
This ingenious tool simplifies the removal and replacement of typical Telephone manhole covers while decreasing the strain on the user.
more info
Manhole Cover Hook
P/N 08172
A simple tool that's been used
for years to pry loose conventional manhole covers.
more info
E-Z Lift Cover Lifter
P/N 70159
The E-Z Lift cover lifter is the tool of choice by Major Telcoms for removing
and replacing manhole and pullbox lids.
more info
Utility Manhole Cover Lifter
P/N (Various Configurations)
Is used for the individual faced with a wide variety of covers in their
work environment.
more info
Grate Lifter
P/N 70160
An ingenious tool designed specifically for
lifting hinged grates used over sidewalk transformer vaults and subway
access.
more
info
P/N 84540
These tough bolts and wrenches use a pentagonal shape to resist unauthorized entry or tampering of manholes.
more info
Steel Manhole Guard Rail
P/N 06867
This high-quality guard helps
protect field crews when working in and around manhole vaults.
more info
P/N 07350
Will give you additional safety when working in round manhole openings ranging from 24 in. (610 mm) to 38 in. (970 mm) in diameter.
more info
Polyethylene Manhole Shield
P/N Various
Weigh and
cost less than metal shields, yet are more durable and user friendly
when used.
more info
P/N 70298
This convenient product will allow multiple pulls at one time by attaching 2 or 3 cables or ducts to the Puller.
more info
P/N 26301-26304
The GMP Digging Bars are available in two styles: San Angelo (SA) and Bell System.
more info
P/N 70210
The fastest way to clear a manhole vault of mud and silt that can't be cleared by a pump.
more info
Cable Feeder
P/N 60580
Provides
increased cable protection no matter how deep the manhole is and an
easy way to apply lubricant to the cable as it passes through the feeder.
more
info
P/N 88830
Give you the same tough construction as our standard feeders with the added benefit of dividing in half for fast, easy removal without needing an end of the cable.
more info
P/N Various
Cable Feeding Sheaves slide into the end of conduit in a manhole wall, allowing the cable being fed into the conduit to roll smoothly over the sheave from all angles.
more info
Cable Feeder
Nozzles
P/N Various
Provide easy connections between our cable feeders
and the conduit being entered.
more
info
P/N 17022
This highly versatile tool will let you easily bend up to 3 1/2 in. dia. cable into almost any shape.
more info
Cable Racking
Jack
P/N 72860
A useful tool to temporarily support cables in manhole vaults while
splicing ends.
more
info
P/N 08633
Use two or more of these handy tools with planking to form a temporary platform in a manhole or cable vault.
more info
P/N 70363
Use two or more of these handy tools with planking to form a temporary platform in a manhole or cable vault. Lighter and stronger than the D Manhole Platform Support
more info
P/N Various
Gives you an alternative to our hickory duct rods to use our full complement of duct cleaning tools.
more info
P/N 06931
An excellent tool for rodding duct, especially for long runs when working from either end.
more info
P/N Various
Made from fiberglass strands impregnated with a highly resilient, thermosetting resin, our Duct Rodders incorporate proprietary strengthening agents that allow GMP to offer a high quality Continuous Duct Rodder at an economical price.
more info
Pull and Assist Winch
P/N (Call Factory for Details)
The Pull and Assist winch has been designed to exceed the requirements
of installing telecommunication cables, employing a 32" diameter single
capstan to provide a controlled force to the pulling rope or tape.
more info
P/N 89801
The GMP family of Line Blowing products are designed to be both rugged and economical. Available are a collection of accessories that will allow you to efficiently blow line ranging from 1" innerduct to 5" duct.
more info
Expanding Jaw Pulling Eyes
P/N Various
GMP’s line of Expanding Jaw Pulling Eyes are
designed for the installation of 1-1/4” to 14” diameter Polyethylene
Pipe in wall sizes ranging from SDR 9 thru SDR 21 and Sch 40.
more
info
P/N 70555
The Double "E-Loc" coupling was designed to join both smooth and ribbed HDPE innerduct, specifically for pneumatic methods of cable placement where air and water-tight integrity of the system is imperative.
more info
Pick Up
P/N 01013
Lost or broke a duct rod or tool inside the conduit?
No problem! Just attach this handy time saver and you're back in business.
more
info
P/N Various
These excellent heavy duty tools help clean stubborn foreign matter from a partially obstructed conduit before placing cable.
more info
P/N Various
Help clean stubborn foreign matter from a partially obstructed conduit before placing cable.
more info
P/N Various
Provides an alternative to the Stiff Spine Cleaners, this tool allows you to clean conduit in a less-abrasive manner while still accomplishing the same goal.
more info
P/N Various
Rubber Duct Swabs are pulled through your duct system after conduit is installed to verify duct integrity, to clean dirt and residue from installation, to provide a clean raceway for ease of cable placement.
more info
P/N Various
Are perfect for use in conduit with extreme bends.
more info
P/N Various
Test Mandrels are pulled through your duct system after conduit is installed to verify duct integrity and to comply with the ovality (roundness) specification the owner may have.
more info
P/N 71140 to 71143
The Heavy Duty Connector connects two items with lugs or wire loop fittings. Typical application is to connect a wire mesh pulling grip to the pulling line.
more info
P/N 71130 - 71132
These Stainless Steel connectors maximize usefulness by catering to the same rope capacity and using different ends to attach to the most popular swivel sizes. We also carry a universal rope to rope connector.
more info
P/N Various
A smart way to test conduit for clearance before cable placement.
more info
P/N Various
Conduit plugs are used to seal auxiliary holes in ducts and around cables. more info
P/N 68592
This handline is intended for lowering tools and materials and for setting up cables when doing underground work.
more info
P/N 86570
These easy-to-install bending shoes protect cables from sharp edges in and around manholes and conduit systems.
more info
P/N 70283
The Manhole Sheave or "Pittsburgh" is used to guide pulling line or cable over the manhole edge when placing and removing cable in manholes which are equipped with pulling in irons to support a sheave and shackle assembly.
more info
P/N Various
This sheave’s big 15 in. (38 cm) bending radius helps provide easy cable pulling in manhole vaults with any fiber optic cable up to 3/4 in. (19 mm) diameter.
more info
P/N Various
Are used in placing and removing underground cables.
more info
P/N 63540
This chain is intended for use in general construction work
more info
P/N Various
Is used for supporting a cable sheave or quadrant block in place at a manhole equipped with pulling in irons.
more info
P/N Various
Pulling Frames are used as a guide for the pulling line and cable when placing and removing cable in manholes that are not equipped with pulling irons.
more info
P/N Various
Used to support quadrant blocks and sheaves when pulling cable through underground conduit.
more info
Quadrant Blocks
P/N 84453
Are used to guide the
winch line and cable when placing and removing underground cable.
more info
P/N 87252
Our pumps are ideal for dewatering construction sites or for all-around use in industrial plants and utilities. They have a Slim-line design, enabling the operator to easily fit them into casings as small as 8" (203 mm) in diameter.
more info
Discharge Hoses
P/N 87250
2" x 25' (50 mm x 8 m) hose for discharging liquid extracted
by submersible pumps.
more info
P/N 70132
Offers the versatility of providing either fresh air supply or exhaust ventilation without relying on an electric power source.
more info
P/N 70133
Offer the versatility of either supplying continuous fresh air or providing ventilation to manholes and other confined areas.
more info
P/N 87143
Heavy Duty blower hose with optional protective steel carrier
more info
P/N 70347
Self contained one-piece duct and bag combination.
more info
Submarine Splice
Case and Clamps
P/N 75662
These are the perfect solution for rugged protection and covering of splices
or repairs in wire-armored submarine cables.
more info
P/N 71546
Enables one field technician to safely handle bulk power batteries at remote terminals.
more info
P/N 06291
Used in the field in bending lead covered cable into place without harming the cable sheath.
more info
P/N 68681
Used to permanently bond the sleeves or sheath of cables in manholes.
more info
Bonding Ribbon Clamp
P/N 06568
Lets you quickly attach Bonding Ribbon to the manhole wall or roof.
more info
#6 Ground Vise Connector
P/N 77966
This connector will ground any #14 to #6 conductor to cable shield at terminals or closures using Bonding Ribbon (P/N 68681) or Braid.
more info
G Bonding Vise Connector
P/N 17061
This one-piece side-loading connector will make solderless connections of Bonding Ribbon (P/N 68681) to Bonding Ribbon, braid, #6 ground wire or messenger bus.
more info
|
|
|
|
|
|
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2003-2004 General Machine Products Co., Inc
