CABLE PULLING HARNESSES
This convenient product will allow multiple pulls at one time by attaching 2 to 4 cables or ducts to the puller.
The slings are manufactured from aircraft quality wire rope
- The various “legs” are staggered in length so the individual connections are not interfering with each other. The lead coupler can be easily dismantled to change out a leg or to add another leg
- Each leg is marked with load capacity and they are pull tested to 3 times that rating. The safety factor of 3:1 is based on equal pull on all cables, (horizontal pull only)
- Other sling configurations are available upon request
Ordering Information
| P/N | Number of Legs | Maximum Harness Width | Safe Working Load | Wire Rope Diameter | Leg Lengths |
|---|---|---|---|---|---|
| 70298 | 3 | 2 1/4 in. (57mm) | 2000 lbs. (9kN) | 1/8 in. (3mm) | 7 in., 10 in., 15 in. |
| 70299 | 3 | 3 1/8 in. (79mm) | 5800 lbs. (26kN) | 1/4 in. (6mm) | 10 in., 18 in., 26 in. |
| 70300 | 3 | 3 1/2 in. (89mm) | 8400 lbs. (37kN) | 3/8 in. (10mm) | 16 in., 25 in., 36 in. |
| 70312 | 4 | 2 1/4 in. (57mm) | 2000 lbs. (9kN) | 1/8 in. (3mm) | 7 in., 10 in., 15 in., 19 in. |
| 70313 | 4 | 3 1/8 in. (79mm) | 5800 lbs. (26kN) | 1/4 in. (6mm) | 10 in., 18 in., 26 in., 35 in. |
| 70314 | 4 | 3 1/2 in. (89mm) | 2000 lbs. (9kN) | 3/8 in. (10mm) | 16 in., 25 in., 36 in., 48 in. |
