topbar
 
HOME
dot
about us
dot
products
dot
tutorials
dot
where to buy
dot
news at GMP
dot
contact us
bar
 
70400
 

Apollo Cable Lasher w/Chest
P/N 70400
The latest word in aerial cable lashing. Perfect for all telcom cable construction, including Fiber, Coaxial and FTTx.
more info


71422
  C2 Cable Lasher w/Chest
P/N 71422
Used to lash small diameter aerial cables to supporting strand with stainless steel lashing wire. It is used primarily for new installations.
more info

86070
  J2 Cable Lasher w/Chest
P/N 86070
Used to lash a single aerial cable or numerous cables to a supporting strand or to an existing lashed cable with stainless steel lashing wire.
more info

10500
  G Cable Lasher w/Chest
P/N 10500
Is designed to lash large single or combination of aerial cable up to 5 in. diameter to a supporting strand. Can be used for new installs or with existing cables in place.
more info

sierra lasher   Sierra Cable Lasher
Our lightest machine, the Sierra lashes cables and wires from drop wire size up to 50mm (1.9 in.) maximum outside diameter to a supporting strand with a single stainless steel lashing wire.
more info

ZB Cable Lasher
  ZB Manual Cable Lasher
The ZB manual cable lasher will lash up to 1 1/4 diameter cable on new construction only. Simple in execution, this lasher is designed to be used in those situations where there is little room and you need to lash a 130 ft span or less.
more info

GMP Cable Lasher Repair Service
 

GMP Cable Lasher Repair Service
GMP maintains a Lasher Service Center in Trevose, PA. It is staffed by experts with decades of hands-on experience in overhead equipment servicing.
more info

Older J Lasher Use and Maintenance manual
Older F Lasher Use and Maintenance Manual


71530
  Stainless Steel Lashing Wire
Is used in a lasher to lash an aerial cable or combination of cables to a supporting strand.
more info

Lashing Wire Grip
 

Lashing Wire Grip
P/N 08605

Used to temporarily fasten lashing wire under tension before placing a permanent clamp like our D or E Lashing Wire Clamps.
more info


Speedigrip Lashing Wire Grip
  Speedigrip Lashing Wire Grip
P/N 01384

A vise type locking grip used to temporarily fasten lashing wire under tension before placing a permanent clamp like our D or E Lashing Wire Clamps.
more info

Standard Cable Block Pusher
  Standard Cable Block Pusher
P/N 70431

Locks onto the strand and push the cable blocks out of the way of the lasher during the cable lashing process. These are especially useful when lashing multiple cables to allow space between the first cable block and the lasher.
more info

Universal Heavy-Duty Cable Block Pusher
 

Universal Heavy-Duty Cable Block Pusher
P/N 70018

Tool that makes the lashing process smoother by maintaining the proper cable lead between the lasher and the cable block.
more info


D Lashing Wire Clamp
 

D Lashing Wire Clamp
P/N
07886

Is perfect for temporary and permanent terminations or grounds, this all steel clamp lets you securely attach two lashing wires or #6 ground wire on any size strand from 1/4 in. to 7/16 in.
more info


E Lashing Wire Clamp
  E Lashing Wire Clamp
P/N 81460

Designed for permanent wire terminations, this clamp has the same hardware, construction and clamping range as our D Clamp (see previous item), but with a one piece stamping formed to let both sides grip the messenger in perfect alignment.
more info

06157
  Tinned Lashing Wire 1# Spool
P/N 06157
Make fast, strong lashings on aluminum alpeth cable sheath with this easy-to-use wire.
more info
bar
GMP reserves the right, without notice, to make changes in equipment design or components as progress in engineering or manufacturing methods may warrant. See our Limited Warranty for more information.
bar
Home dot About GMP dot Products dot Tutorials dot Where To Buy dot News dot Contact Us dot Privacy Policy
General Machine Products Co. 3111 Old Lincoln Highway Trevose, PA 19053-4996 USALOGO
Tel: +1.215.357.5500 Fax: +1.215.357.6216 Email: info@GMPtools.com
© 2011 General Machine Products Co., Inc