CABLE PUSHER

The GMP Cable Pusher has been designed to assist the laying of electrical cables.

The unit has a profiled drive system to grip the cable, with a load applicator of adjustable upper rollers. The unit is hydraulically driven and is powered by an Optional Portable Hydraulic Power Pack or user-provided hydraulics. Control Valve Modules and Power Pack are offered separately.

Cable Pusher
Cable Pusher Typical Setup
Specification
Cable Size: 1.25 -6 in. (30-150mm) O.D.
Dimensions: 55 in. W x 20 in. L x 31 in. H (500mm W x 1390mm L x 770mm H)
Max Push: 1543 lbs. (700kg)
Max Speed: 33 ft. /min (10m/min)
Controls:Single Lever for Push/Pull Operations
Drive System:Hydraulic
Min Hydraulic Requirement: 4.75 gpm/870 psi (18 Ltr/min at 60 bar)
Weight:441 lbs. (200kg)

subhead_spacer

Ordering Information

P/NDescriptionWeight
89760Cable Pusher for 1.25 - 6 in. (30-150mm) Power Cable441 lbs. (200kg)
89761Valve Control Module with Hoses32 lbs. (14.5kg)
34519Foot Control Valve and Hoses
(single direction only)
75 lbs. (35kg)
32799Hydraulic Power Pack 145 lbs. (66kg)

Options

P/N 32800 Power Pack
 

89761 Valve Control Module comes fitted with two (2) hoses, 6.5 ft. (2m) long to connect with the Cable Pusher
 
34519 Foot Control Valve and Hoses
(single direction only when used with the cable pusher)
Accessories

subhead_spacer

Trench Roller (Aluminum Roller)
Trench Roller (Aluminum Roller)

P/N 89765   Trench Roller (Aluminum Roller)   Weight: 12.5 lbs. (5.7kg) (Limited Quantity)
Designed for use on soft earth or in trench work. Robust die cast aluminum roller fitted with oil-impregnated bearings. Fabricated from a corrosion protected steel frame. Maximum cable diameter 4″.

subhead_spacer

Heavy Duty Cable Roller (Steel Roller)
Heavy Duty Cable Roller (Steel Roller)

P/N 89766   Heavy Duty Cable Roller (Steel Roller)   Weight: 8.8 lbs. (4kg)
All Zinc plated heavy duty assembly suitable for cables up to 5″ (125mm) dia.
A corrosion protected steel frame fitted a large steel roller running on sealed ball bearings.
Maximum cable size is 5 inches (127 mm)

subhead_spacer

Triple Corner Rollers
Triple Corner Rollers

P/N 89767   Triple Corner Rollers   Weight 26.5 lbs. (12kg)
Used in pairs Triple Corner Rollers are used on bends in open trench work.
A corrosion protected steel frame fitted with steel rollers running on sealed ball bearings.
Can be linked together with stake pins provided to form a continuous corner roller system.
Maximum cable size is 5 inches (127 mm)

subhead_spacer

“V” Frame Guide Set
“V” Frame Guide Set

P/N 89762   “V” Frame Guide Set   Weight: 43 lbs. (19.5kg)
Positioned in front of drum to guide cable into trench or duct. Made from corrosion protected steel. Rollers fitted with oilite bushings.

subhead_spacer

Trench Feed Roller
Trench Feed Roller

P/N 89763   Trench Feed Roller   Weight: 35 lbs. (15.9kg)
Guides cables into trench, adjustable vertical guide rollers. Made from corrosion protected steel. Rollers fitted with oilite bushings.

subhead_spacer

Lead Roller
Lead Roller

P/N 89768   Lead Roller   Weight: 40 lbs. (18.1kg)
Guides cables into trench. Made from corrosion protected steel. Rollers fitted with oilite bushings.