CABLE SHEAVE SHACKLE
Used for supporting a cable sheave or quadrant block in place at a manhole equipped with pulling-in irons.
Contains a two part clevis made of high strength structural steel, with two sets of sheave pin holes 1 3/8 in. (35mm) dia. for accommodating either a cable sheave or quadrant block
- The load half has a forged steel hook that attaches to the pulling in irons with a standard 1/2 in. (12mm) x 6 ft. ( 1.8 m) construction chain, while the support half has a shoulder eyebolt so you can tie it off to a support rope over the manhole
- Will accommodate any 11 in., 20 in. or 26 1/2 in. cable sheave with a 1 3/8 in. hole size for 3 in., 4 in. or 5 in. cable
- Each shackle includes a 1 5/16 in. dia. sheave pin and can withstand working loads up to 10,000 lbs (4535kg)
- Now included Safety Latch as required by OSHASelect the right GMP Sheave or Quadrant Block to accommodate your cable pulling needs, then choose a shackle from the table below to match the size
Ordering Information
| P/N | Cable Sheave Size | Weight |
|---|---|---|
| 71643 | 3 in. (76mm) | 32 lbs. (14kg) |
| 71644 | 4 in. (102mm) | 45 lbs. (20kg) |
| 71716 | Replacement Pin 1 5/16 X 4" | 5 lbs. (2.2kg) |
| 71717 | Replacement Pin 1 5/16 X 5 " | 6 lbs. (2.7kg) |
| 29550 | Safety Latch Kit | .5 lbs. (.23kg) |
