Discontinued
COMPRESSOR AFTERCOOLER FOR TORNADO
The Compressor Aftercooler has been designed to cool compressed air and remove water droplets prior to entering a GMP Tornado Cable Blowing Machine. The cooler unit is mounted on a tubular steel frame and is complete with pneumatic wheels and transit handle for easy maneuverability.
- An air driven motor impeller forces cooling air through the Compressor Aftercooler and reduces the temperature of the compressed air by approximately 18º Fahrenheit (10º Centigrade)
- The air motor is driven by compressed air taken from the down stream side of the water separator and passes through a filter-regulator-lubricator assembly prior to entering the air motor
- The Compressor Aftercooler is fitted with cam action quick release air hose couplings for easy fitting to interconnection air hoses normally supplied by GMP Products with a Tornado Cable Blowing Machine
- Waste oil/water mixtures are collected in a frame mounted drain can for environmentally acceptable disposal. The water separator protector bar doubles as a carry handle to assist with moving over soft terrain or loading into a vehicle.
SPECIFICATIONS
Length: 45 in. (1135 mm)
Width: 25 in. (640 mm)
Height: 39 in. (1000 mm)
Weight: 163 lbs. (74 kg)Max Working Pressure: 175 psi (12 bar)
Max Air Compressor Flow Rate: 423 cfm (12M³/Min)
Max Air Inlet Temperature: 149° F (65° C)
Max Air Outlet Temperature: 122° F (50° C)
Max Ambient Air Temperature: 113° F (45° C)
Air Hose Connections Type: 1 1/2 in. Cam and groove quick couplings
P/N 89009 Compressor Aftercooler for Tornado Weight: 163 lbs. (74 kg)
