INNER & MICRO DUCT CUTTERS
Innerduct Cutter
Make precise cuts around innerduct diameters up to 3 3/8 in. (88mm)
- Used primarily for allowing access to fiber already placed inside of inner duct when it needs to be repaired, or broken out, the tubing cutters provide a lean cut every time
- The special wheel allows it to cut a wide variety of plastic pipe and tubing
- Open the cutter with a push of a button
- Line up the cutter wheel with your cut-off mark. Push in on the knob to bring the wheel up against duct then turn the knob to penetrate.
- Uses a ball detent pin for quick wheel changes
Ordering Information
| P/N | Description | Weight |
|---|---|---|
| 10912 | Innerduct Cutter for 3/8 in. - 3 1/2 in. | 2 lbs. 11 oz. (1.2 kg) |
| 10911 | Replacement Wheel | 1 oz. (28 g) |
Ratcheting PVC Cutter – Klein Tools ®
- Provides straight cuts of 1/2-inch to 1-1/4-inch (O.D. 5/8-Inch to 1-5/8-Inch) white and gray schedule 40 and 80 PVC
- Quick, one-handed blade release
- Ratchet action allows easy, one-hand cutting
- No tools are required for instant blade change
- Replacement blade and pin available
P/N 89563 Ratcheting PVC Cutter Weight: 1.1 lb (0.5 kg)
Large Capacity Ratcheting PVC Cutter – Klein Tools ®
- Makes easy, straight cuts with no burrs
- Cuts 1/2-inch to 2-1/2-Inch white and gray schedule 40 and 80 PVC with minimal effort
- Blade positioned within the body of cutter for no risk of damage or injury to the user
- Quick one-handed blade release
- Lightweight and durable magnesium alloy die-cast with rubber grip
- Ratchet action allows easy, one-hand cutting
- The hooked jaw holds the pipe in proper cutting position
- Replacement blade available
- No tool required for instant blade change
- Flip-out support prevents flattening of diameters less than 2-Inch (51 mm) when cutting
P/N 89564 Ratcheting PVC Cutter Weight: 1.3 lb (0.6 kg)
PVC and Multilayer Tubing Cutter – Klein Tools ®
- Cuts 1-inch (25 mm) O.D. multilayer plastic tubing and up to 3/4-inch (19 mm) Schedule 40 PVC pipe
- Handle latch keeps tool closed
- PTFE coated steel blade
- Rubberized grip with anti-impact design
- Do NOT use to cut metallic pipes or cable wire
- Do NOT cut cold PVC
- Replacement blade available
P/N 88912 PVC and Multilayer Tubing Cutter Weight: 7.6 oz (215 g)
3/4-Inch PVC Cutter
- Cuts up to 3/4-Inch schedule 40 PVC
- Makes clean burr-free cuts in PVC and flexible pipe
- Reversible blade doubles life
- Cuts 1-3/8-Inch O.D. flexible plastic pipe
- Handle latch keeps tool closed
- Replacement blade available (Cat. No. 50549)
P/N 89562 3/4-Inch PVC Cutter Weight: 8 oz (226 g)
Rotating Micro Duct Cutter
The rotating micro duct cutter will cut from 3 to 14mm micro duct without harming the fiber in an occupied duct.
P/N 89567 Rotating Micro Duct Cutter Weight: 3 oz. (85g)
