Micro Cable Fleeter
Micro Cable Fleeter


The Micro Cable Fleeter replaces the manual method of “figure eighting” cable at the midpoint and provides protection and security for the cable. Following installation of the cable in the first leg of the duct route the balance of the cable is removed from the drum and fed into the “Fleeter”, thereby releasing the cable end ready for blowing into the second leg. The Fleeter provides a smooth and simple system while ensuring cable protection from pedestrians or vehicles and prevents contamination from mud, soil or dust.
  • The Fleeter is designed to work in conjunction with the GMP Breeze or Air Stream Cable Blowing Machine, which provides the cable feed in and out of the “Fleeter”
  • It has a nominal capacity to store 6500 ft. (2000 meters) of 8.5mm diameter cable

Note: Please have your microduct O.D. available when ordering to select the correct duct clamp that’s included with your purchase.


Cable diameter: 5 – 8.5mm (0.196 in. – 0.334 in.) OD Max
Cable Storage Length: 6500 Feet (2000 Meters) of 8.5mm diameter cable
Microduct Size: 8 mm – 18 mm ø


Basket Diameter: 47.25 in. (1200mm)
Max. Width: 50.6 in. (1825mm)
Height: 55.9 in (1420mm)

P/N 89002   Micro Cable Fleeter for 5 – 8.5mm Cable   Weight: 99 lbs. (45kgs)

Operation and Maintenance Manual

Microfleeter Demo Video


Fleeter Wheel Kit
Fleeter Wheel Kit Option
  • Fleeter Wheel Kit Option Allows you to easly move the loaded fleeter around the yard and onto a trailer for transport
  • Affords one person positioning at the worksite
  • This option is installed by simply removing the leveling feet and replacing them with the casters and retaining nut and washer
  • All three wheels are lockable

P/N 89296   Fleeter Wheel Kit Option (set of three)   Weight: 6 lbs. (2.7kg)

Micro Cable Fleeter