PORTABLE POWERED DUCT ROD PUSHER
With GMP’s Portable Powered Duct Rod Pusher and a 1/2 inch GMP Duct Rodder, the job of placing pulling lines or fiber cables just got that much easier with less personnel in old or occupied conduits.
- Designed to work with a GMP 1/2 in. Continuous Duct Rodder.
- Operations and Maintenance Manual Power Pack Manual
- Hydraulically powers GMP 1/2 in. Duct Rodders in to and out of conduits.
- Pushes and pulls with forces up to 300 lbs.
- Rod speeds up to 130 ft/min (40 meters/min)
- Accurately measures footage and speed with an electronic monitoring system that works in either direction.
- The readout can be scaled to feet or meters.
- When pulling back, the fiberglass rod is placed directly back onto the cassette.
- Features rod access areas for wiping the rod clean during the pull back operation.
- Also comes with a package of rod wiper pads (P/N 32290) Duct Clamp on the machine, and the specially designed Duct Mounting Clamp Assembly (P/N 32221) provided on the rodder cassette, help stabilize both pieces of equipment during use. Comes with a gasoline driven power pack and hoses.
- Pusher is mounted on a lightweight, brightly painted, tubular-steel frame that can be tilted at a 30-degree angle to the manhole to reduce initial bending of the fiberglass rod.
- Must order 1/2 in. Duct Rodder Separately. Also, user must provide length of 1 1/4 in. innerduct between Rod Pusher and Rodder Cassette, and another length of 1 1/4 in. innerduct between the pusher and the duct to be rodded.
- Included with pusher is a gasoline hydraulic power pack.
P/N 32800 Power Pack Manual Weight: 145 lbs. (66kg)
- Metaflux Chain Cling Spray- This is the only chain lubricant that we recommend for lubricating the drive chain in the Powered duct rod pusher (P/N 89153)
- Also comes with a package of rod wiper pads (P/N 32290) Duct Clamp on the machine, and the specially designed Duct Mounting Clamp Assembly (P/N 32221) provided on the rodder cassette, help stabilize both pieces of equipment during use. Comes with a gasoline driven power pack and hoses.
Ordering Information
| P/N | Description | Weight |
|---|---|---|
| 89004 | Powered Duct Rod Pusher (calibration in feet) | 210 lbs. (95 kgs.) |
| 89005 | Powered Duct Rod Pusher (calibration in meters) | 210 lbs. (95 kgs.) |
| 89191 | Replacement Drive Belt Each (2 required) | 3.36 lbs. (1.54 Kg) |
Inner Duct Attachment Tool
This tool forms a quick and sturdy attachment point for the Power Duct Rod Pusher feeder tube in a hand hole or manhole. This eliminates the need to tie off to a ladder or some other point.
- The three supplied sections connect to each other allowing you to increase the length.
- The components have a baked enamel black finish and zinc plating for corrosion resistance.
- Each section has a case hardened steel point for securing against the vault surface.
- Supplied kit fits holes between 20 in. to 78 in..
- Additional /replacement extension sections can be ordered separately to accommodate larger manholes.
- 12 in. Extension
P/N 03504
- 24 in. Extension
P/N 32937
P/N 89387 Inner Duct Attachment Tool Weight: 15 lbs. (6.8 kg)
Duct to Duct Adapter
This easy to use accessory is used when rodding an occupied duct but also can be used on an empty one. The adapter securely and safely positions your rodder in line with the existing innerduct without disturbing the existing cable.
- Quickly sets up with an adjustable wrench.
- For use with any combination of 1 in., 1 1/4 in. and 1 1/2 in. innerduct.
P/N 89383 Duct to Duct Adapter Weight: 8.4 lbs. (3.8kg)
