Please note: The AccelAir 2 is no longer available and has been replaced by the AccelAir 3 featuring 2 times the pushing force as the Accelair 2 with increased range of cable sizes and micro-ducts. See the AccelAir 3 at https://www.gmptools.com/89601-2/

ACCELAIR 2 CABLE BLOWING MACHINE

accelair2 logo

The AccelAir 2 Blown Fiber Machine is the latest complement to the range of fiber optic blowing equipment available from GMP.

Designed to suit the smaller end of fiber range, the AccelAir 2 completes the range of Tornado, JetSteam, Hurricane, AirStream, Whisper, and Microdrive blowing installation systems all from one company.

A compact integrated fiber-blowing machine, the AccelAir 2 benefits from full automation and fiber management. Its sophisticated fiber protection is designed to ensure that the blown fiber’s mechanical and optical integrity is maintained. The machine is self-contained and only requires a single electrical supply and compressed air to operate.

MAIN FEATURES
  • Installs cable diameters of .8 to 1.6 mm with buckle protection and up to 5 mm without buckle protection
  • Single person operation
  • Accommodates microduct sizes of 3 to 12 mm, larger cable and duct sizes over the Accelair 2
  • Digital cable speed and distance monitoring
  • 2 time the pushing force over the Accelair 2
  • Integral air valve and pressure gauge<\li>
  • Powered directly by the supplied 120/240v universal power supply
  • Supplied with a heavy-duty waterproof carry case
  • Lightweight, durable construction with precision machined parts
  • SPECIFICATIONS
    Cable Diameter: .8 to 5 mm
    Tube Size (Outside Dia): 3 to 12mm
    Cable Speed (Adjustable):
    0-328 ft/min (0-100m/min) without buckle detection
    0-164 ft/min (0-50 m/min) with buckle detection
    Pushing Force (Adjustable)
    13.56 lbf (60N)
    Max Air Pressure: 220 psi (15 Bar) 8.5 cfm (.24 m/min)
    Power Requirement:120/220v power supply
    Width:7.2 in. (184 mm)
    Length: 6.5 in. (166 mm)
    Height: 8.5 in. (216mm)
    Weight: 6.6 lbs (3 kgs)
    ORDERING INFORMATION
    P/NDescriptionWeight
    89601Accelair 3 Cable Blowing Machine6.6 lbs (3 kgs)
    ACCELAIR DOCUMENTSACCELAIR VIDEOS
    Accelair 3 Cut Sheet
    Accelair 2 Tire Change
    Configuration and AccessoriesAccelair 2 Basic Setup
    Operation and Maintenance Manual
    Accelair 3 Common Spare Parts
    WHAT'S INCLUDED WITH YOUR ACCELAIR3

    • AccelAir 3 Cable Blowing Machine

    • Remote Control

    • 120/240V Universal Power Supply

    • Buckle (w/5 shuttles) or blowing plate for (1) cable size of your choice

    • Infeed guide for cable size of your choice

    • Tube clamp and 5 seals for (1) tube size of your choice

    • Toolkit

    • Heavy-duty weatherproof case

    • Manual

    Compressor for Micro Fiber Cable Blowing Machines

    The Air Compressor is designed specifically for use with our Micro Fiber Cable Blowing Machines. This reliable & efficient screw compressor, powered by a gasoline engine, provides a maximum working pressure of 220 psi (15 bar) with 35.3cfm (1000 litres/m) flow.

    The compressor is modified to include an after-cooler and water separator. The output air is filtered and conditioned to optimize the performance of our micro fiber cable blowing machines. The compressor package includes a 50 foot 3/4″ diameter air hose for connection to the microfiber cable blowing machine.

    Air Compressor for Micro Fiber Blowing Machines

    Engine: Honda 21 hp
    Fuel Cap.: 5 gal (20 liters)
    Length: 42 in. (1070 mm)
    Width: 31 in. (800 mm)
    Height: 30 in. (780 mm)
    Weight: 487 lbs. (221 kg)

    P/N 89011 Breeze Compressor Weight: 487 lbs. (221 kgs)


    Accelair 2 Cable Blowing Machine