MODEL G CABLE LASHER – Discontinued
We are no longer producing the Model G Cable lasher although we will be supporting parts and repair of existing units. The replacement to this is the GMP SuperG Cable lasher.
The largest of the GMP Lashers, this unit is designed to lash large single or combination of aerial cable up to 5 in. diameter to a supporting strand. Can be used for new installs or with existing cables in place.
- Lashes any cable from about 2 1/2 in. to 5 in. (64-127mm) diameter, on strand from 11/32 in. to 3/4 in. (9-19mm) diameters with one or two left lay spiral wrappings of .065 in. diameter stainless steel wire
- Nominal spacing between wraps is 16 1/2 in. (42cm).
- Each lasher includes a 6 ft. bridle rope assembly with snap hooks, an information and operations manual and a heavy duty storage chest
This big tough lasher has a pulling mechanism that pivots about the axis of the rear driving roller, so it always applies the right amount of hold down force. For lashing large diameter cable, it’s your best choice.
|10500||G Cable Lasher Standard||.065||71 lbs. (32.3kgs)|
|10502||G Cable Lasher Modified for 1200 ft. of .045 in. wire||.045||71 lbs. (32.3kgs)|
|03165||Bridle Rope Assembly only (photo)||3 lbs. (1.4kg)
|10501||Chest only||36 lbs. (16.4kgs)|
|G Cable Lasher w/Chest Shipping Weight||110 lbs. (50kgs)|
|70190||Towing Lanyard 35 ft. (optional)(250 lbs. WLL)||6 lbs. (2.7kgs)